Description
Very high performance, compact linear sensors with a body diameter of just 9.5mm. Fully sealed and ideal for use on gearbox, throttle, suspension and steering sensing applications.
Technical Data Mechanical life >25 million
Operational speed 10 m/s Max
Environmental sealing IP65
Temperature range -30°C to +100°C
Independent linearity ±0.5%
Recommended wiper current < 10ƒÊA
Cable type 24 AWG Raychem 55 wire, braid. 0.5M FDR25 sleeve
Cable length 500mm (screened)
Mechanical stroke +1.5mm of electrical stroke
Installation
There are 3 leads that come from the sensor: the red lead should be attached to the +5v supply from the DL1, the black lead should be connected to the ground connection on the DL1 and the white lead should be connected to an analogue input. A user defined variable can be entered into the analysis software to convert the voltage into an actual displacement if required.
|